Vante Ruby
Produce Sophisticated Tip Geometries Using Ruby’s “Smart Mold” Technology
- RUBY features auto configuration capability via “Smart Mold,” a patented feature that provides the ability for parametric data to be stored in the mold module for transfer to any system automatically.
- Quickly reliably load process parameters via system configuration sensing and software control.
- Digital pressure regulation provides precise pressure control and alarms when pressure tolerances are not met.
- Additionally, pre-assigned programs stored externally to the generator can be accessed and loaded via limited modbus capabilities.
- All platforms can be teamed with a variety of tipping, welding, and forming molds for many, including custom, applications.
RF Generator 4350 This newly redesigned Ruby generator builds on legendary legacy performance by providing additional process capabilities and flexibility, even with legacy system molds. Updated components assure robust sustainability and supply chain resiliency. New HMI programming with simplified navigation make this a user-friendly system with minimal operator inputs required.
Tip Forming Platform 4360 The 4360 platform has also been redesigned to provide longer feed distances, remove manual toggle switches, improved slide location adjusters, graduated feed slide speed controls, all encased in an easy-to-clean cabinet. The “H” version platform has a slide insertion force of 9.3lbs @ 30 psi for medium to large sized tubes. The “L” version platform has a slide insertion force of 3.2lbs @ 30 psi, suitable for low to medium sized tubes. Both can accommodate a variety of molds for many different applications.
Pressure Box Model 4370 is a more compact version of the original, with a new easy-to-clean cabinet and power-on indicator light.
Capabilities
| Tip Types | Applications | Weld Types |
| Taper Tips | Single/Multilumen Applications | Butt Welds |
| Radius Tips | Marker Band Embedding/Placement | Overlap Welds |
| Soft Tips | Braid to Non-Braid Welds | |
| Closed End Tips | Braid-Non Braid Welds | |
| Dilator Tips | Balloon Welds | |
| Flaring | ||
| Neck Downs | ||
| IV Tipping |
Features:
- Digital Air Pressure Regulation
- Precise heat placement
- Smart Mold
- Proprietary low mass mold design
- Air cooled/no water chillers
- Solid State Circuitry
- Closed loop temperature feedback
- Temperature repeatable to ± 1% up to 350°C and ± 2% for 350°C to 425°C
- Operator safe so there are no hot spots or pinch points
- Multi-level password protection
- Semi-automated · High and low force platforms
- Multiple program parameter storage capability
- Low friction pneumatic air cylinders and slides
- Temperature monitoring with high/low alarms
Benefits:
- Compact footprint with improved cable management
- Consistently repeatable, high-quality results
- Easy to set up and validate
- Quantifiable and validatable process
- High production first pass yields
- The mold assembly is designed for easy installation and removal from the platform
Specifications
Operating Dimensions
5.3 X 14.5 X 8.5 in | 12.5 x 9.0 x 5.4 in | 13.4 x 8.2 x 3.7 in
Shipping Weight
19.4 lbs. (8.8 kg) | 17.2 lbs. (7.8 kg) | 12.3 lbs. (6.8 kg)
Weight
14.4 lbs. (6.5 kg) | 12.2 lbs. (5.4 kg) | 7.3 lbs. (4.36 kg)
Maximum Air Supply
* | 120 psi (830kPa) | 120 psi (830kPa)
Number of Slides
* | 2 slides | *
Certifications
CE, cTUVus & WEEE
Power Input
100 VAC 50/60 Hz | 115 VAC 50/60 Hz | 230 VAC 50/60 Hz
RF Power Output
185 Watts Maximum
Radio Frequency Output
6.78 MHz
Use
Indoor Use Only
Temperature
68 - 95°F (20 - 35°C)
Humidity
70% maximum relative humidity Non-Condensing
Over-voltage Category | Pollution Degree | Altitude
II | 2 | Up to 2000 m
